Champion-power-equipment 10032 Manuel d'utilisateur télécharger pdf (Page 13)

REV 10032-20131126 10

10032 ENGLISH

SPECIFICATIONS

Performance Speciﬁcations

– Rated Pull ..................................... 3,000 lb. (1361 kg)

– Gear Reduction Ratio ....................................... 153:1

– Motor ............................ Permanent Magnet 1.3 HP/1 kW (12V DC)

– Duty Cycle .......................................... Intermittent

– Drum Size .....................1.2 in. (D) x 2.9 in. (L) [31.5 mm(D) x 73 mm(L)]

– Cable ........................ 3/16 in. (D) x 45.9 ft. (L) [4.8 mm(D) x 14 m(L)]

– Gross Weight ....................................... 24.3 lb. (11 kg)

– Net Weight ......................................... 22 lb. (10 kg)

– Height .......................................... 4.3 in. (10.8 cm)

– Width ........................................... 4.3 in. (11 cm)

– Length ......................................... 12 in. (30.4 cm)

– Bolt Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 in. (79.5 mm)

Line Speed and Motor Current (First Layer)

Line Pull

LB 0 1000 2000 3000

KG 0 454 907 1361

Line Speed (12V DC)

FPM 11.2 8.8 7. 2 3.9

MPM 3.4 2.7 2.2 1.2

Motor Current (12V DC) A 15 80 120 150

Running Time* Minutes 1 1 1 1

Cooling Time** Minutes 5 5 5 5

Line Pull and Cable Capacity Per Layer

Line of Cable 1 2 3 4 5 6

Rated Line Pull

LB 3000 2373 1962 1673 1470 1290

KG 1361 1077 891 759 667 585

Cable Capacity

FT 5.6 12.1 19.7 2 7.9 37.1 45.9

M 1.7 3.7 6.0 8.5 11.3 14.0

*If the motor becomes uncomfortably hot to the touch, stop winching immediately and let it cool down

for 5 minutes. Do not pull for more than one minute at or near the rated load.

**Electric winches are designed and made for intermittent use and should not be used in constant

duty applications.

It is recommended to use double line and snatch block for pulling loads over

1500 lb. (680 kg).

1 2 ... 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Champion-power-equipment 10032 Manuel d'utilisateur Page 13