Champion-power-equipment 13004 Manuel d'utilisateur télécharger pdf (Page 10)

7 REV 13004-20120905

ENGLISH 13004

ASSEMBLY

Battery cables should not be drawn taut.

Leave some slack for cable movement.

CAUTION

Never route electrical cables across any sharp

edges, through or near moving parts, or near

parts that become hot.

CAUTION

Winch Wiring

With some applications the motor leads may need

to be rotated to avoid interference with other

components.

Leads default position. Leads rotated 90º

Winch Wiring Cont’d.

1. Mount the winch to your vehicle.

2. FOR WINCH TO FULLY FUNCTION CONNECT

ALL LEADS CORRECTLY.

3. Connect the battery leads: Connect the red

(+) lead to the positive (+) terminal of the

vehicle’s 12 volt battery. Connect the black

(–) lead to the negative (–) terminal of the

vehicle’s 12 volt battery. (see wiring diagram)

4. Connect the winch leads: Connect red (+)

lead of the winch connection cables to the

positive (+) terminal of the winch motor.

Connect the black (–) lead of the winch

connection cables to the negative (–) terminal

of the winch motor. (see wiring diagram)

5. Check for proper drum rotation. Pull and

turn the clutch knob to the “out” position

(Free spooling). Pull out some cable from the

drum, and then turn the clutch knob to the

“In” position to engage the gears. Press the

cable out button on the handlebar switch. If

the drum is turning and releasing more cable

then your connections are accurate. If the

drum is turning and collecting more cable

then reverse the leads on the motor. Repeat

and check rotation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Commentaires sur ces manuels

Pas de commentaire